Covercraft Motorcycle Covers

Covercraft Motorcycle Covers – Ready-Fit® Universal Motorcycle Cover

Covercraft Motorcycle CoversThe best way to keep a cycle looking new is to protect it from the assault of the elements. Covercraft motorcycle covers provide maximum protection against blistering sun, rain, snow, bird and tree droppings, dirt, dust, industrial pollutants and salt air. Covers also hide the motorcycle from view, to help prevent theft. Available in four (4) sizes, does not include air vent or windshield liner.

Features & Benefits

  • Silver-colored urethane coated polyester fabric reflects heat, is waterproof and lightweight.
  • Heat shield along bottom of cover where it contacts engine, pipes and brake rotor.
  • Theft-resistant non-scratch grommets are surrounded by a multi-strand steel cable sewn inside covers.
  • Elastic in the hem at front and rear helps hold the cover in place.
  • All seams are overlapped and double stitched for superior strength.
  • Ready-Fit silver urethane covers carry a two-year limited warranty to the original purchaser. Covercraft will repair or replace any cover that becomes unserviceable during normal use (subject to factory inspection).

 

 

Covercraft Motorcycle Covers – Ready-Fit® Semi-Custom Motorcycle Cover

Available in nine (9) semi-custom sizes, including two designed exclusively for the new breed of large Cruisers. All the covers feature anti-theft, steel reinforced grommets, air vent, heat shield at high-temp areas, storage bag and windshield liner (where applicable).

Features & Benefits

  • Silver-colored urethane coated polyester fabric reflects heat, is waterproof and lightweight.
  • Heat shield along bottom of cover where it contacts engine, pipes and brake rotor.
  • Includes screened air-vent to allow condensation and vapors to escape.
  • Theft-resistant non-scratch grommets are surrounded by a multi-strand steel cable sewn inside covers.
  • Elastic in the hem at front and rear helps hold the cover in place.
  • All seams are overlapped and double stitched for superior strength.
  • Ready-Fit silver urethane covers carry a two-year limited warranty to the original purchaser. Covercraft will repair or replace any cover that becomes unserviceable during normal use (subject to factory inspection).

 

 

Covercraft Motorcycle Covers – Custom-Fit Covers for Harley-Davidson® Motorcycles

New or classic, any Harley-Davidson should be protected from extended exposure to dirt, heat, moisture and ultraviolet rays. Custom-tailored patterns provide a nice snug fit. Covers provide maximum protection against blistering sun, rain, snow, bird & tree droppings, dirt, industrial pollutants and salt air, while hiding the bike to help prevent theft.

Custom patterned, these covers feature anti-theft steel reinforced grommets, heat shield (except polycotton & flannel covers), soft liner at windshield & fender area (except polycotton & flannel) and storage bag.

Features & Benefits

  • Choose from two (2) different fabrics, each designed for a specific level of protection and personal taste.
  • Silver or black-colored urethane-coated polyester is waterproof and lightweight. The silver color helps
  • reflect heat while the black is a more traditional color used by H-D owners. For indoor storage we offer a
  • paint-pampering black flannel fabric.
  • Heat shield aluminized inner liner protects covers from hot pipes and engine (not used on flannel or WeatherShield covers).
  • Sewn-in screened air vent allows condensation and vapors to evaporate and keeps your bike cooler on
  • hot days (not needed on flannel or WeatherShield fabrics).
  • Theft-resistant non-scratch grommets are surrounded by a multi-strand steel cable sewn inside the cover.
  • All seams are overlapped and double stitched for superior strength.
  • Elastic in the hem at front and rear helps hold the cover in place.
  • Flannel & urethane-coated covers carry a two-year limited warranty to the original purchaser. (Covercraft will repair or replace any cover that becomes unserviceable during normal use – subject to factory inspection).
  • Custom patterned, these covers are available in sizes to fit the full Harley-Davidson model line-up, from 883′s to Dressers. To assure the perfect fit, patterns 154 thru 157 are designed to fit with the handlebars locked to the left!

 

 

Covercraft Motorcycle Covers – Pack-Lite™ Semi-Custom Motorcyle Covers

Pack Light Motorcycle CoverWeatherShield® HP, there’s never been a cover fabric this good! Our base cover fabric is made from a patented immersion process that uses heat and pressure to permanently encase the high-strength polyester fibers with a special formulated finish that also places a durable, breathable barrier within the woven fabric creating a high-performance fabric that provides superior protection from the elements. Unlike traditional coatings and laminations that just protect one side of the fabric, WeatherShield HP uses a variety of computerized process controls to place protective finishes inside the fabric.

Finally, motorcycle owners can buy a cover with a fabric that provides maximum protection, but isn’t bulky and hard to store. Full covers protect the bike from sun and rain, dust, dirt, bird and tree droppings, as well as pollutants in the air. They’re available in both our Deluxe semi-custom sizes and the custom-patterned program for Harley-Davidson® models. Due to the unique construction of the fabric, they don’t need liners or vents or even heat shields (but the bike does need to cool down for about 3 to 5 minutes before you install the cover). This is the cover you’ve been waiting for – check out the features below and you’ll agree – there’s never been a fabric this good!

Features & Benefits

  • Super compact – covers store in 7″ x 7″ x 8″ or less!
  • Weatherproof – Fabric sheds water as soon as it hits the cover.
  • Superior Dry Time – Because the fabric sheds moisture, just shake any surface moisture off the cover and it dries in minutes.
  • Breathable – Allows any heat, condensation or vapors under the cover to easily escape.
  • UV Resistant – Special finish additives minimize UV degradation and protect the bike’s finish, seat, instrument cluster and windscreen (if applicable).
  • Dust-proof – Patented fiber encapsulation process prevents dust from filtering through fabric.
  • Abrasion resistant – Polymers are smooth and silky to prevent paint and windscreen abrasion.
  • Fade resistant – Solution-dye construction means color goes all the way through fibers, not a surface-dye.
  • Easy care – Clean the cover in your home washer and dryer.
  • Elastic in the hem at front and rear helps hold the cover in place.

 

 

Covercraft Motorcycle Covers – Pack-Lite™ Custom Motorcycle Covers for Harley-Davidson®

WeatherShield® HP, there’s never been a cover fabric this good! Our base cover fabric is made from a patented immersion process that uses heat and pressure to permanently encase the high-strength polyester fibers with a special formulated finish that also places a durable, breathable barrier within the woven fabric creating a high-performance fabric that provides superior protection from the elements. Unlike traditional coatings and laminations that just protect one side of the fabric, WeatherShield HP uses a variety of computerized process controls to place protective finishes inside the fabric.

Finally, motorcycle owners can buy a cover with a fabric that provides maximum protection, but isn’t bulky and hard to store. Full covers protect the bike from sun and rain, dust, dirt, bird and tree droppings, as well as pollutants in the air. They’re available in both our Deluxe semi-custom sizes and the custom-patterned program for Harley-Davidson® models. Due to the unique construction of the fabric, they don’t need liners or vents or even heat shields (but the bike does need to cool down for about 3 to 5 minutes before you install the cover). This is the cover you’ve been waiting for – check out the features below and you’ll agree – there’s never been a fabric this good!

Features & Benefits

  • Super compact – covers store in 7″ x 7″ x 8″ or less!
  • Weatherproof – Fabric sheds water as soon as it hits the cover.
  • Superior Dry Time – Because the fabric sheds moisture, just shake any surface moisture off the cover and it dries in minutes.
  • Breathable – Allows any heat, condensation or vapors under the cover to easily escape.
  • UV Resistant – Special finish additives minimize UV degradation and protect the bike’s finish, seat, instrument cluster and windscreen (if applicable).
  • Dust-proof – Patented fiber encapsulation process prevents dust from filtering through fabric.
  • Abrasion resistant – Polymers are smooth and silky to prevent paint and windscreen abrasion.
  • Fade resistant – Solution-dye construction means color goes all the way through fibers, not a surface-dye.
  • Easy care – Clean the cover in your home washer and dryer.
  • Elastic in the hem at front and rear helps hold the cover in place.

 

Form-Fit® Motorcycle Covers

Form Fit Motorcycle CoverThe Ultimate INDOOR Cover – great protection for great rides…

Features & Benefits

  • Body-hugging polyester knit outer shell is made with spandex (to provide stretch and recovery).
  • 100% cotton terry loop is added to the underside of the shell during the knot process and then sheared to a luxurious fleece finish. Fleece provides a super soft touch against fine paint finishes, wind screens, chrome, etc.
  • Form-Fit covers follow every curve of the bike for a truly custom fit.
  • Available for choppers to 10 feet overall length, full dress touring bikes, cruisers and sport bikes.
  • Easy to clean – just throw it in the washer & dryer at home!
  • Form-Fit covers carry a lifetime limited warranty to the original purchaser. (Covercraft will repair or replace any cover that becomes unserviceable during normal use – subject to factory inspection).